Cold shrink technology is applying silicone rubber's track resistant and pre-stretching the rubber components on a removable core. Removal of the core after positioning the termination allows the product to shrink into position, providing a tight seal. The cold shrink technology has been widely accepted as the industry standards in USA for many years. BKE first introduced this line of products from USA, consequently developed the manufacturing capabilities in China. Today, BKE's product lines, utilizing only imported genuine silicone rubber, meet all international engineering standards and ISO-9001 manufacturing certification. BKE has also developed a team of seasoned technicians and management personnel specifically to support the product of cold shrink products.

　　

1. Convenient to Install 　　Using cold shrink technology, the crew only has to remove the cone, without using any special tools or in any special working environment. Unlike the hot shrink technology, cold shrink does not need fire. The cold shrink technology is most suitable in areas that are narrow and clumsy. Each of our standard packaging includes the installational guide. 　　2. Broad Applications 　　BKE's Cold Shrink Cable Terminals are suitable for a variety of cable applications because they were manufactured using the pre-stretched  technology structure. It can be widely used in electrical systems, and mining, petroleum and coal industries. 　　3. High Reliability 　　BKE's cold shrink cable has a reduced electro intensity of 15 V / mil. The insulation electric field has an even distribution across the cold shrink. This characteristic improves the discharging voltage of the outside insulation. Since all raw materials are imported high quality silicon rubber, the water resistance property is superb. Even with rainfall, no conductive film would be formed. In addition, it has excellent insulating, anti-corrosive and anti-ultraviolet ray properties, ensuring product stability and longevity. 　　The cool shrink cable terminals, using specially pre-scribed material and crafted production processes, can be tightly sealed to the cable, providing direct and even pressure to the cable body. 　　4. Constantly Applying the State-of-The-Art Technologies in USA 　　Through joint research and development efforts with our USA counter parts, we regular exchange technical information through meetings, conferences and visits. Newly developed technologies are quickly adopted in our engineering design and manufacturing facilities in Beijing. All newly developed product improvements are quickly introduced to our customers and brought to the market place.

　　

·Conform to the standards of IEEE48, VDE 0278 and GB 11033-89. 　　·Practice IEC605024: 1997. Load cynical test in eternal voltage over 60 times. 　　·Awarded ISO 9001 qualification certificate. 　　·BKE's advanced research and development center can provide high quality research, development, and troubleshooting, in addition to the testing and analytical services.

　　

CONDUCTOR SIZE：	RANGE OF CABLE DIAMETER (mm)
	MINIMUM	MAXIMUM
25～50	15.6	19.7
70～120	19.6	24.6
150～240	24.2	30.0
300～400	30.6	35.8